add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Cooling
Control, reduced toxicity
Fuel system
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Steering
Brakes
Technical data
Anti-lock brakes (ABS)
Bleeding the hydraulic system of a drive of brakes with scanner use
Checking and adjusting the brake pedal position
Check the brake servo
Bleeding the hydraulic system of a drive of brakes
Adjust the parking brake stroke
Vacuum brake booster
Brake tubes and hoses
Pressure regulator
Brake pedal
Replacing the front brake pads
Caliper front brake
The main brake cylinder
Replacing brake pads on the rear drum brakes
Replacing the working brake cylinder
Parking brake
Hydraulic block HECU ABS
Wheel speed sensor
Troubleshooting
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Brake tubes and hoses




Check

PERFORMANCE ORDER
1. Check the brake hoses for cracks and local swelling. If necessary, replace the brake hose.
2. Check the brake lines for cracks, damage and corrosion.
3. Check the union nuts of brake hoses for damage and leaks.

Setting

PERFORMANCE ORDER
1. Install the brake pipe, without twisting them.
2. Brake hoses should be installed as far as possible from the weld edges or moving parts of the car.
3. Tighten all connections required torques.

Tightening torque coupling nuts: 13-17 N ??? m
Tightening torque brake hoses to the front caliper: 25-30 N ??? m





« previos page
Vacuum brake booster		 next page »
Pressure regulator

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.