REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
			Technical Specifications (SOHC and DOHC)
			Checking the fuel pump
			Checking the pressure created by the fuel pump
			Verification system of injection MFI
			The control lamp fault (MIL)
			DTCs ?�OBD-II?�
			DTCs except ?�OBD-II?�
			Replacement of the fuel filter
			Replacing the overflow limiter (two-way valve)
			Replacing fuel level sensor
			The engine management system MFI
			Fuel injectors
			Throttle knot
			The power supply system with the carburettor
			Check idle speed
			Adjusting the idle speed
			Speed of idling and adjustment of the fuel mixture
			Check and adjustment of the starting device
			Check and adjustment of a free wheeling of a cable of an accelerator
			Fuel tank
			EVAP canister
			Replacement of the fuel filter
			Carburetor
			Cable and accelerator pedal
			Troubleshooting Fuel system with the carburettor
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Check and adjustment of a free wheeling of a cable of an accelerator

PERFORMANCE ORDER

1. Start the engine and let it run in the engine speed to idle.
2. Check that the accelerator cable does not have a freewheel.
	3. If the accelerator cable has a free stroke, adjust it as follows: - Loosen the adjusting nut so that the throttle lever was loose; - Eliminate sharp bends accelerator cable; - To move the cover of a cable to the throttle lever, turn the adjusting nut until the beginning of the movement of the throttle lever, then unscrew it by one turn back and lock the adjusting nut.

next page »
Fuel tank