 printable version
Fuel tank
1 - an arm;
2 - turn off the fuel valve;
3 - turn off the fuel valve cap;
4 - a cover;
5 - high pressure hose; | 6 - screw cap;
7 - the fuel pump;
8 - a cover toplivonalivnoy neck;
9 - two-way valve hoses;
10 - two-way valve. |
Withdrawal
A warning  Gasoline is explosive, therefore at work with elements of fuel system provide normal ventilation of the workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke.
Before removing the fuel tank, drain the fuel. Clean the fuel tank from the fuel vapor.
Remove the cap from the fuel filler toplivonalivnoy to equalize the pressure in the tank to atmospheric pressure.
| PERFORMANCE ORDER | | 1. Remove the rear seat cushion and remove the fuel pump connector. |
A warning Do not disconnect from the fuel tank fuel filter, unless a replacement.
| | 2. Loosen the hose clamps and disconnect the hoses from the fuel tank fuel supply and return. | | 3. Disconnect the water supply hose and a hose from the bottom of the inlet hose. | | 4. After removing the protection tape and mounting the fuel tank slightly lower fuel tank and disconnect the connector from the fuel level sensor. | | 5. Remove the fuel tank. |
|
A warning Close all open the opening of the fuel tank in order to prevent the output from the tank to the fuel vapor.
Even in an empty fuel tank has a fuel vapors that are explosive, so be careful. Provide adequate ventilation of the workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke. As soon as possible, clean the fuel tank from the fuel vapor.
Check
Check the condition and the presence of defects replace the following items.
| PERFORMANCE ORDER | | 1. The damaged fuel tank. In the presence of leaking fuel from the tank, clean the tank and check for signs of corrosion, damage and cracks. Damaged or corrode the fuel tank must be replaced. |
A warning When cleaning the inside surface of the fuel tank, do not use tools that could damage the protective layer.
| | 2. The internal contamination, deformed, damaged or rusty fuel. | | 3. Damage to the gasket at the top of the fuel tank. |  | 4. Check that the two-way valve, purging it from both sides. If the air is difficult, so the valve is serviceable. |
|
Setting
| PERFORMANCE ORDER | | 1. Install the fuel tank and secure it with the tape until it touches the bottom of the car. | | 2. Connect to the fuel tank all the hoses and pipes, is not to confuse their places. |  | 3. Slowly slide the fuel supply pipe to the filter installed in the tank and secure it. |
|
|
