REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
			Technical Specifications (SOHC and DOHC)
			Checking the fuel pump
			Checking the pressure created by the fuel pump
			Verification system of injection MFI
			The control lamp fault (MIL)
			DTCs ?�OBD-II?�
			DTCs except ?�OBD-II?�
			Replacement of the fuel filter
			Replacing the overflow limiter (two-way valve)
			Replacing fuel level sensor
			The engine management system MFI
			Fuel injectors
			Throttle knot
			The power supply system with the carburettor
			Check idle speed
			Adjusting the idle speed
			Speed of idling and adjustment of the fuel mixture
			Check and adjustment of the starting device
			Check and adjustment of a free wheeling of a cable of an accelerator
			Fuel tank
			EVAP canister
			Replacement of the fuel filter
			Carburetor
			Cable and accelerator pedal
			Troubleshooting Fuel system with the carburettor
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Replacement of the fuel filter

PERFORMANCE ORDER

	1. Remove the rear seat cushion and remove the inspection panel of the fuel pump. To relieve the pressure in the fuel system, disconnect the connector of the fuel pump, start the engine and wait until it stops due to running out of fuel from the fuel lines and the fuel line.
2. Disconnect the negative battery terminal and connect the connector of the fuel pump.
A warning Before releasing remove the fuel pressure in the fuel system, since, otherwise, the fuel under pressure will rapidly flow out of the fuel system.
3. Remove the screws that secure the fuel filter pipe clamps.
A warning Close fuel filter cloth to prevent splashing of fuel caused by the residual pressure in the fuel line.
4. Remove the mounting bolts of the fuel filter and remove it from the bracket.
	5. After replacing the fuel filter, check fuel system for leaks.