 printable version
Heating and ventilation system
Panel heating and ventilation system is shown in Fig.
| Panel heating and ventilation systems:
1 - the switch of fan operation;
2 - Pen mode ventilation;
3 - the handle of adjustment of temperature of air;
4 - selector switch air intake. |
Mode selector switch FAN
The switch is designed to turn on and off the fan, and select the frequency of its rotation. The fan speed and, hence, the magnitude of the air stream from the ventilation system can be changed manually by turning the switch between positions "1" and "4".
Mode selector INTAKE
The switch is designed to switch between modes of ventilation mode of outdoor air and recirculation.
| Mode selector switch air intake |
In the interior of the vehicle enters the outside air is heated or cooled depending on the choice of other functions.
Recirculated air into the vehicle interior and cooling or heating, depending on the choice of other functions.
A warning  Using air recirculation mode for a long time can cause fogging of the windscreen and side windows and the air inside the vehicle becomes stale. Moreover, extended air conditioner operation in the recirculation mode may cause the air inside the car is too dry.
SELECTING THE FAN
Ventilation mode selection knob is used to select the direction of air flow.
Air flow through the vents into the upper part of the vehicle interior.
| In the area of the legs / heads |
Air enters through the vents in the upper part of the passenger compartment and in the legs. This allows you to warm air fed through deflectors to the legs, but not heated or slightly heated air through vents in the upper part of the passenger compartment.
Air is supplied only to the feet.
| In the area of feet / heating vents to the windscreen and side windows |
Air enters through the vents in the legs, as well as to the windshield and door glass. When you select (for vents heated windscreen and side windows) will be automatically turned on air conditioning.
| It vents heated windscreen and side windows |
The air enters through vents only to the windshield and door glass of a vehicle. When you select (for vents heated windscreen and side windows) will be automatically turned on air conditioning.
HANDLE temperature adjustment
The handle is used to turn on and off the heater and select the desired temperature.
| Temperature adjustment knob vohduha |
Knobs heater
For normal operation of the heater, set the mode selector to the air intake of outside air intake mode  and ventilation mode selector switch (in the legs)  .
For faster heating, set the selector switch the air intake in the recirculation mode 
In the event of misting, set ventilation mode selector switch (for vents heated windscreen and side windows)  (thus, to be automatically activated air conditioner), the selector switch air intake outside air intake mode .
For maximum heat, set the knob to position the air temperature Warm (hot air).
Mode air supply to the legs / head
Mode air supply to the legs / heads can simultaneously warm air fed through deflectors to the legs and slightly heated air through vents in the upper part of the passenger compartment. To enable this mode, set the knob in the following positions:
| Position the handles in the mode of the air supply to the legs / heads |
- Set the mode selector to the air intake of outside air intake mode ;
- Set the mode of ventilation in the position (in the legs / head)  ;
- Set the temperature knob between the provisions of Cool (cold air), and Warm (hot air).
Ventilation mode
To turn on the ventilation system, set the knob in the following positions:
| Position the handles in the ventilation mode |
- Set the mode selector to the air intake of outside air intake mode ;
- To direct all air flow through vents heated windscreen and side windows, set the ventilation mode selector switch (in the head)  ;
- Fan switch modes, select the desired fan speed;
- Set the temperature knob between the provisions of Cool (cold air), and Warm (hot air).
Center vent
The central air vents of the ventilation system located in the center of the instrument panel.
To change the direction of the air flow control knob, located in the middle of the central deflector to the desired position.
| Destinations travel center vent control knobs |
Side air vent
Side vents are situated on the edges of the instrument panel. To change the direction of the air flow control knob, located in the middle of the side deflector to the desired position.
| Direction of travel the control knob of the side deflector |
Defrosting / condensation (fogging)
Use this mode to remove frost or condensation (fogging).
| Position the handles in the mode of removal of frost / condensate (fogging) |
To remove the frost or condensation (fogging) on the inside of the windshield:
- Set the mode selector to the air intake of outside air intake mode switch ;
- Set the mode selector switch to the ventilation vents heated windscreen and side windows (the air conditioning is automatically switched on);
- Set the temperature control knob to the desired position;
- Set the mode switch of the fan between the positions of "1" and "4". To remove the frost or condensation (fogging) on the outside of the windscreen:
- Set the mode selector to the air intake of outside air intake mode ;
- Set the mode of ventilation in the position (to the heating vents of the windscreen and side windows) (the air conditioning is automatically switched on);
- Set the temperature control knob in position Warm (hot air);
- Set the mode switch of the fan in position 3 or 4.
Tips for managing ventilation systems
To prevent dust or unwanted odors in the interior of the vehicle, temporarily set the air intake mode to the recirculation mode .
To maintain the freshness of the air in the car do not forget to return the selector switch to the air intake of outside air intake mode .
It promotes vitality and comfortable state of the driver.
Air for heating / cooling system is supplied through the grates situated directly in front of the windshield. Make sure that these lattices are free of leaves, snow, ice or other obstructions.
SWITCH AIR CONDITIONING
Air conditioning is activated by pressing the switch on the air conditioning control panel, heater / air conditioning.
The air conditioner
Cooling
Using the air conditioner to cool the air inside the passenger compartment of a vehicle:
| Location pens when the air conditioner in cooling mode |
- By turning the mode switch of the fan, turn the fan;
- By pressing the air conditioner switch the air conditioner. In the instrument cluster indicator lamp lights up the air conditioner;
- Set the mode selector to the air intake of outside air intake mode ;
- Set the temperature control knob in position of Cool (cold air). This position provides maximum cooling air. The temperature of the air in the passenger compartment can be changed by moving the handle towards position Warn (hot air);
- Mode selector switch to select the desired fan speed of the fan. For maximum cooling, turn the mode switch of the fan in the position of one of the greatest speeds or temporarily set the air intake mode to the recirculation mode .
Drying heating
For the drying heater, follow these steps:
| Location pens when the air conditioner in the heating mode, the drying |
- By turning the mode switch of the fan, turn the fan. Press the air conditioner switch the air conditioner. In the instrument cluster indicator lamp lights up the air conditioner;
- Set the mode selector to the air intake of outside air intake mode ;
- Set the mode of ventilation in the position to head ;
- Fan switch modes, select the desired fan speed;
- To speed up the process, turn the selector switch of the fan in the position of one of the greatest speed;
- Temperature adjustment knob to adjust the desired temperature.
Tips for managing air conditioning
If the air inside the car is too hot, open the windows for a few minutes to cool the air in the passenger compartment.
When the air conditioner all the windows must be closed to prevent warm air entering the passenger compartment.
At slow driving, eg in a traffic jam, include a lower gear. This will increase the speed of the crankshaft of the engine, which in turn will increase the speed of the compressor.
On the steep slopes turn off air conditioning to avoid overheating the engine.
In winter time, or during irregular use of the air conditioner, the air conditioner once a month for a few minutes. This prevents deterioration of lubricating the internal parts of the compressor and ensures the maintenance of the air conditioning system in good condition.
|
