 printable version
Three-point seat belt driver with an inertial locking mechanism
Putting on a seatbelt
To fasten your seat belt, pull it out of the retractor and insert the belt strap (latch plate) into the lock until it clicks.
| To lock the seat belt buckle |
The seat belt automatically selects the required length only after you manually adjust the lap belt so that it tight-fitting your hips. After putting this belt, it automatically follows the slow movements of your body, but in the case of a sudden or strong spurt belt automatically locks to keep fastened rights. The belt will also be blocked if you pull it sharply forward. Check the reliability of fastening the seat belt buckle, and that the seat belt is not twisted. Adjustable belt
Never wear the lap belt across the abdomen. In the event of an accident the belt can dramatically cut into the abdomen and increase the risk of injury. When the belt is too high, it increases the risk that you will slide out from under the belt in the event of a traffic accident or when braking. This could lead to vehicle damage, serious injury or death. Both hands must not simultaneously be over or under the belt. One hand has to be under and the other above the belt, as shown in Fig. Never miss a shoulder belt under the arm that is closest to the door.
| Location part of the thigh belt |
Releasing the seatbelt
For Releasing the seatbelt, grasp the bar (latch plate) and press the button on the buckle. When the belt is released, it automatically retracts the retractor.
If not, check the belt for looping and try again.
| Otst?�givanie front seat belt |
|
