add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Magentis
Home
 
Kia
Magentis
Engines
Lubrication System
Cooling system
The control and toxicity
Fuel system
Technical data
Multi-point fuel injection (MFI)
Verification system of injection MFI
The control lamp fault (MIL)
Diagnostic trouble codes
The coolant temperature sensor (ECT)
The gauge of absolute pressure in an inlet collector (MAF) with the IAT
Meter of air (MAF)
The temperature sensor of air entering the engine (IAT)
Throttle position (TP)
The modulator control the speed of the crankshaft of the engine idling
The heated oxygen sensor (HO2S)
Camshaft position sensor (CMP)
Sensor crank angle (CKP)
Fuel injectors
The solenoid valve system EVAP
Knock sensor
Potentiometer adjustment WITH idling (only for leaded petrol)
Sensor power steering (PSP) [2,0 liter DOHC]
:20. Throttle position (TP)
Replacing fuel level sensor (2.0 L DOHC)
Checking the fuel pump (2,0 l DOHC)
Checking channel clearing of the canister with the activated coal (2,0 l DOHC)
Check of the pressure created by the pump (2,0 l DOHC)
Replacement of the fuel filter (2,0 l DOHC)
Purification of the throttle device
Checking channel purification with charcoal canister (2.5L V6)
Replacing fuel level sensor (2.5L V6)
Checking fuel pump (2.5L V6)
Check of the pressure created by the pump (2.5L V6)
Replacement of the fuel filter (2.5L V6)
Adjusting the throttle position sensor (TP) (2,5 l V6)
The pedal and the accelerator cable
Fuel line
Fuel tubes and tubes of system EVAP
Fuel tank
PROCEDURE FOR TROUBLE
Troubleshooting
Ignition system
Coupling
Transmission
Power shafts, axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

The modulator control the speed of the crankshaft of the engine idling



The modulator control the speed of the crankshaft of the engine idling is provided with two coils, which are managed by individual driver stage engine control unit. Depending on the pulse supplied to them, balance the magnetic forces of the two coils results in different angles of rotation of the modulator. The modulator is installed in the air passage that bypasses the throttle. Due to the transmission of additional air modulator adjusts the engine speed to idle.

Check

PERFORMANCE ORDER

1. Disconnect from the modulator frequency control idling.
2. Measure the resistance between the connector terminals.

  • Resistance between terminals 3 and 2: 10,5-14 Ohm
  • Resistance between terminals 1 and 2: 10-12 ohms at 20 ?� C

3. Connect to the modulator frequency control idling.





« previos page
Throttle position (TP)
next page »
The heated oxygen sensor (HO2S)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.