printable version

Exterior Lights

Exterior Lights

External lighting devices consist of six lighting: headlights, turn signal lights, marker lights, hazard warning lights, brake lights and license plate light (only rear). Lamps all six systems are located in the left and right headlights, left and right rear lights, rear top stoplight and two license plate light. All lighting is powered 12-volt electrical system and is controlled by the driver.

Rear lights

Rear lights are arranged so that the aerodynamic shape of the body continues. The lens of the flashlight has three colors: amber - turn / hazard warning lights, translucent - reserve, red - dimensional light / brake. Rear lights contain four bulbs. Two lamps - one filament, and are designed for a turn signal / hazard warning lights and reverse. Two lamps with two filaments bulb designed for brake lights and side marker lighting lamps are mounted on a plastic holder. To replace the incandescent lamp holder is removed from inside the car.

Lamp of a stoplight turns on a switch mounted near the brake pedal and actuated by pressing the brake pedal.

Lamps backing included a switch mounted on the gearbox. When reverse gear is engaged, the switch contacts are closed, resulting in a light bulb reverse.

Turn signal lamps included combined switch mounted on the steering column. Hazard warning lights turn on the switch located on the center instrument panel. Flasher / hazard warning lights located under the dash on the left side.

Headlights

Lights are formed so that the aerodynamic shape of the body continues. The headlamp is attached to the body with two bolts.

Each lamp contains three incandescent bulbs. One bulb with two filaments bulb is used for low beam headlights and tail lights. Light bulb with a filament halogen type. O-ring seals of the filament lamp holder to avoid getting into the spotlight moisture and dust. Lamp replacement is carried out from the engine compartment without removing the headlight. Each spotlight is adjustable light in the horizontal and vertical planes. In two adjusting screws for each lamp are accessible through the holes located on the rear lights.

The other two are designed for incandescent indicator / hazard warning lights and side marker lights.

Turn signal lamps included combined switch mounted on the steering column. Hazard warning lights turn on the switch located on the center instrument panel.

Rear top stoplight

Rear Diffuser top stoplight is red and clearly visible through the rear window. Rear top stoplight has one lamp.

Lamp of a stoplight turns on a switch mounted near the brake pedal and actuated by pressing the brake pedal.

License plate light

Two license plate light mounted in the trunk lid. Each lamp is mounted on a lamp. Lanterns are included with the inclusion of marker lighting. Each incandescent light bulb is protected by a translucent plastic lens, fixed with two screws. To replace the lamp, please remove the transparent lens that is attached with two screws.