 printable version
Hardware luggage
The appearance of the luggage compartment is shown in the illustration.  | The luggage compartment of the car |
First-aid kit and warning triangle Established kit is equipped on the left glove compartment tailgate of a vehicle, - a hinged lid box is marked with an icon depicting a white cross on a blue background. Periodically check the completeness of the kit.
The warning triangle is placed in the right of the glove compartment of a vehicle tailgate - hinged lid box marked icon with the image of an exclamation mark.  | Location of the glove box for storage kits (1) and warning triangle (2) |
The spare wheel, jack and a compressor for tire inflation Description of standard storage sites the spare wheel, jack (a wheel wrench) and the compressor to inflate tires is given in the introduction to these Guidelines. Safety net If necessary, the safety net can be stretched behind the front seats or behind the rear bench seat, - fold down the decorative cover fasteners, hook the net.  | Details of the installation of the upper edge of the safety net |
Sheds grid on the upper fasteners, hooks hook bottom fixing belts for special anchor brackets on the car floor panel, then tighten the belts using the clamping locks.  | Details of fastening of the bottom edge of the safety net (for installation behind the front seats - turnbuckle belt closed mesh) |
 | Details of fastening of the bottom edge of the safety net (for installation behind the rear bench seat) |
The reliability of the grid tension should be checked after a short time - if necessary tighten the fastening straps.  | Transportation of passengers in the seats located behind the stretched mesh is not allowed! |
Removing the grid in reverse order. Staffing storage twisted safety net is provided behind the rear bench seat. Horizontal blinds  | Installing the rear horizontal blinds seems possible only when harvested folding seats optional third row (see. Section seat adjustment). |
The housing is mounted in a horizontal blind thrust in front of the luggage - after the introduction of housing into the receiving recess should press the button release latch and pull out the movable fixing element. Next curtain is drawn across the back slot of the casing and is fixed in a special holder near the opening of the tailgate.
To release the shutter release it from the rear holders, and holding of the loop wound into the casing. Next, slide until it clicks into the mobile fixing element and release the shutter assembly of the receiving recesses in the side trim panels in front of the luggage  | Details fixing casing shutter in front of the luggage compartment (for fastening the housing to press the lock release button (1) and to move the movable retaining element in the direction opposite to the arrow) |
 | Details of installing the rear horizontal blinds |
Floor covers On the floor of the car under the rear bench seat assembly includes a removable cover. Before removing the lids must be removed folding seats optional third row (see. Section seat adjustment).
Fold the back bench seat and fold the cover of the floor ahead - releasing locks caps automatically. Remove the cover folded in half and placed in pockets on the backs of the rear seats folding optional third row.  | Before retracting the pockets seat backrests folding the third additional series taken cover luggage compartment floor folded in half |
 | The retraction of the lid folded into the pocket folding rear seat backrest |
To install the cover, thread the hand should be in a special service port and fill the guide pins in receptacles - release button should snap fasteners. Elements for fixing cargo Special brackets on the floor panel - behind the two front seats and assemblies directly to four in the luggage compartment.  | The bracket for fixing cargo |
Options for securing cargo at a different location shown in the illustrations.  | Accommodation options Shipping |
 | Options for securing cargo |
Four fasteners for fixing a light load are provided on the walls of the luggage compartment.  | Hooks for fixing a light load |
| 
