 | 1. Pull out the seat belt and check the belt for the presence of damaged threads. |
2. The damage can be caused, for example, pinching the belt or the impact of a burning cigarette. In this case the belt should be replaced.
3. If there are no signs of chafing damage the threads do not need to replace the belt.
4. The belt having a hard course, you should check for twisting. If necessary, remove the trim on the center rack.
5. If the automatic winder does not work, the belt must be replaced (work HUNDRED).
6. The shoulder belt can be cleaned with just soap and water. In no event should not be used for this purpose solvents or chemical cleaners.
7. Check the location of the airbags for damage.
8. The surface of the steering wheel and dashboard, under which there are nodes airbags, dry brush or cloth moistened with water.  | Attention! It is not allowed to paste swift or any material steering wheel and the surface of the front panel to the right. |
|
