printable version

Removal and installation of a fuel distributive highway and injectors

Highway

Details of installation of a fuel distributive highway

1 - cover of the power unit with integrated air cleaner 2 - Service valve 3 - Lock 4 - Plastic cover	5 - A fuel highway 6 - the fuel supply line 7 - Bolts Y62 - Fuel injector

PERFORMANCE ORDER

Remove the cover of the power unit with integrated air cleaner (1) (see. Section Removal and installation of components of an inlet air path). Otboltite retainer (3). Remove the plastic cover (4). Through the service valve, relieve the pressure in the fuel system - ready to collect fuel displaced. Otboltite fuel supply line (6). Remove the mounting bolts (7) and remove the fuel distribution manifold (5) complete with injectors (Y62) to the intake manifold. Installation is in the reverse order.

Injectors

Details of installation of the fuel injectors

16/7 - Protivorotatsionny lock 17 - Fuel pipe	Y62 - Fuel injectors Arrow - The rectangular nozzle

PERFORMANCE ORDER

Remove the fuel distribution manifold (17). Remove the injectors (Y62). Installation is in the reverse order - if necessary, replace the O-rings. Before installing the O-rings should be lubricated with oil. Make sure that protivorotatsionnye clips (16/7) snap on rectangular nozzles (arrow).