 printable version
Air nozzles
Through all of the nozzle is fed into the heated or unheated room (depending on the position of the handle A) air. The distribution of the air nozzles determined by the position of the handle C. Extras can be individually opened or closed nozzle 3 and 4.
Nozzle closed: dial on the side  . The nozzle is open: dial on the side  .
Depending on the position of the dial changes the air flow direction adjustment. If the dial rotate under the grate deflector changes the direction of air flow in the horizontal plane. Through the nozzles 2 saved nezapotevshey lower part of the windshield.
How to clean the ice windshield and side windows
The switch set to stage 3. A knob is turned clockwise until it stops. Handle With on  . The nozzles 4 positioned in such a way that the air flow is directed to the side of the glass.
How to prevent fogging of the windscreen and side windows
If the humidity is high, for example, in the rain, the windows fog up, it is recommended to do the following: The switch put on stage 2 or 3. A knob, if desired, converted into a preheating zone of air. Handle with put on . Through nozzles 4 can send an additional warm air to the side windows.
Ventilation (fresh air supply to the salon)
When the following position of the control of the nozzles 3 and 4 are served unheated fresh air: The supply switch to the desired level. A handle to rotate counter-clockwise until it stops. Handle With on .
When fogged windshield put a handle on C .
At the request of the handle C can also be assigned to another position. The nozzles 3 and 4 open.
How to quickly raise the temperature in the cabin
The switch put on stage 3. A knob is turned clockwise until it stops. Handle with put on .
When fogged windscreen to put pen to C .
Nozzles 4 set as desired.
How to maintain a pleasant warmth in the cabin
Once cleansed windows from fogging and the cabin temperature has reached the desired level, it is recommended to do the following: The supply switch to the desired level. A knob to set the desired heating. Handle with set in the area between "Air flow in the footwell" and "Cleaning the ice windscreen and side windows."
When fogged windshield mounted on the handle With .
Nozzles 4 set as desired.
General information
To HEATING work reliably, you need an opening for fresh air intake, located in front of the windshield, keep clean from ice, snow and leaves. At any intermediate position can be set only handles A and C. To avoid fogging, should be at a low vehicle speed switch in turn constantly lower stage fan mode, and put in position C .
The heating capacity of the heating system depends on the temperature of the coolant of the engine - so the greatest heating occurs when at operating temperature engine. The used air leaves through outlets in the rear; should not obstruct the exit site used air. By Car sedan can not override anything the gap between the luggage rack and the rear window, which is used to remove the air.
| 
