 printable version
Hood lock
Fasteners bonnet
1 - lock hood,
2 - mandrel,
3 - release lever bonnet,
4 - a clip, | 5 - blade screwdriver,
6 - self-locking bolt, 12 Nm
7 - microswitch
8 - a cable of opening the bonnet |
A warning  Before removing the arm 3, you must first remove the grille.
Screwdriver 5 is used to spread the tabs at the rear of the bonnet lock lever before removing the arm.
6 bolts used to fasten the bonnet. When installing it is necessary to use new bolts.
Microswitch 7 is set in the presence of the vehicle anti-theft system.
Adjusting the lock opening the hood by moving it at the expense of increased holes hood mounting bolts. Before adjusting the position of the bonnet, loosen the lock bolts.
Withdrawal
| PERFORMANCE ORDER | | 1. Using a screwdriver blade at the rear of the bonnet release lever, unclench antennae and remove the lever. | | 2. Unscrew the two self-locking bolts securing the hood latch. | | 3. Disconnect the cable of opening of the bonnet from the castle. | | 4. Disconnect the electrical connector from micro anti-theft system. | | 5. Remove the lock from the car hood. |
|
|
