REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B5 (from 1996 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Passat B5
		Instructions
		Maintenance
		Engines
		Cooling
		Fuel system
		Motor Control
		An exhaust system
		Transmission
		Chassis
		Steering
		Brakes
		Body
			general information
			Care body
			Care of an upholstery and rugs
			Repair of insignificant damages of a body
			Repair of strong damages of a body
			The front transverse panel
			Front bumper
			Removal of the lever locks the hood
			Adjust the side guides bumper bracket
			Rear bumper
			Front fender
			Facing of a niche of a forward wheel
			Air intake grille
			Hood
			Radiator grille
			A cable of opening the bonnet
			Hood lock
			Interior finish doors
			Differences at removal of an upholstery of the right front door
			The control unit door mechanism
			Door Seal
			Lateral furnish of a luggage space of models the Sedan
			Lateral furnish of a luggage space of models the Versatile
			The rear luggage compartment trim models Sedan
			Upholstery lid
			Upholstery tailgate
			Flooring luggage on Touring models
			The trunk lid
			Castle trunk
			Adjusting trunk lid / tailgate
			Lock the back door on models the Versatile
				The cylinder lock of a back door
					Bracket rear door lock cylinder
			The front door
			The cylinder lock of the front door
			The external handle of the door opening
			Door lock
			Manual lowering of glass of a door
			Glass doors
			Bracket door
			Interior rearview mirror
			The center console
			Front ashtray
			Rear ashtray
			Trim lever (automatic transmission)
			Decorative overlays under a radio receiver
			Lower trim the dashboard on the driver side
			Glovebox
			Inner escutcheon Door mirror
			Ceiling handle
			Sunshields
			Sill
			The windscreen and rear window
			The front seats
			Headrest
			Side airbags
			Rear seat
			The left rear seat backrest
			Carpet covering
			Elements of interior decoration
			Door mirror / mirror glass
			Exterior mirror housings
			Fencing / curb plank roof
			Side Panel Body
			Replacement of rubber tapes of brushes of screen wipers
			Windshield washer nozzles
			Wiper arms
		Heating, ventilation
		Electrical

printable version

The cylinder lock of a back door

Withdrawal

PERFORMANCE ORDER

	1. Turn the bracket so as to align the lift rod (1) from the actuating motor (2).
	2. For key turn the lock cylinder (1) by 90 ?� clockwise (arrow A) and pull over, remove it from the bracket (arrow B).

Setting

PERFORMANCE ORDER

	1. Insert the lock cylinder into the bracket (arrow A) and turn it 90 ?� counterclockwise (arrow B).
	2. Turn the lock cylinder bracket so that the lift rod (1) came out of the actuating motor (2). Make sure that in this position the lock cylinder was located in the well-Fix bracket.

« previos page
Lock the back door on models the Versatile

next page »
Bracket rear door lock cylinder