add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Design Features
Possible malfunctions of the body, their causes and remedies
Removing, dismantling and installation of bumpers
Removing and installing radiator grille
Removal and installation of mudguards of wheels and Lockers
Removal and installation of a forward wing
Removal and installation of a lattice box vozduhopritoka
Hood
Door
The trunk lid
Manhole cover fuel tank filler pipe
Seats
Removal and installation of facing of a tunnel floor
Restraint System (SRS)
Design Features
Removing and installing driver's airbag
Replacing the front seat belt
Replacement of a back seat belt
Removal and installation of the electronic control unit an additional system of passive safety
Rear view mirrors
Dashboard
Heater and air conditioning
Interior fittings
Removal and installation of facing of salon
Removal and installation of facing the boot
Windscreen wiper
Replacement of the fixed glass body
Removing and installing the attachment flanges of the battery
Care body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Replacement of a back seat belt



This subsection shows replacement of the seat belt and the middle of the left rear seat. Seat belt passenger rights similar to replace.
You will need a key "17".
1. Remove the rear bench seat (see. "Removing and installing rear seat").
NOTE
Belt buckle middle and right rear seat ...
... As well as the middle passenger seat belt and seat belt buckle left passenger bolted to the base body.

2. Remove the bolts ...
3. ... and remove the belt buckles of the right and the middle passenger in the back seat ...
4. ... and the middle passenger seat belt buckle and the left passenger.
5. Loosen the bolt of the bottom fastening of the left passenger seat belt ...
6. ... and remove the bolt.
7. Pushing force clamps, remove the hole facing the left rear pillar hole edging.
8. Remove the trim from the rear left-hand column (see. "Removal and installation of facing of salon").
9. Pass edging hole with the hole in the belt buckle facing ...
10. ... and remove the trim from the seat belt.
11. Loosen the screws fastening the top of the left passenger seat belt ...
12. ... and remove the bolt.
13. Pass the buckle through the hole edging facing ...
14. ... and remove the edging with a belt.
15. Pull the strap through the gap between the tailgate and the shelves lining the back of the bar.
16. In the trunk, remove the bolt inertia reel belt to the body ...
17. ... and remove the belt.
18. Install the rear seat belts and all the removed parts in reverse order of removal.




« previos page
Replacing the front seat belt
next page »
Removal and installation of the electronic control unit an additional system of passive safety

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.