 printable version
Anti-theft system
This system is designed to prevent unauthorized entry into the vehicle. This system has three states: the first "Ready", the second "Alarm" and the third state "Trip". When triggered, the anti-theft system, an audible alarm (siren) and direction indicators start flashing. Ready Status
Park the car and turn the engine off. Bring the system to a state of readiness in the following order:
- Remove the key from the ignition switch;
- Make sure that the hood and the trunk lid are locked;
- Lock the doors using the transmitter of the remote control door locks.
After following the above steps, the direction indicators flash once, indicating that the system is alerted.
A warning  If any of the doors, the bonnet or the boot lid is opened, the system will not be alerted.
If this happens, it brings the system to a state of readiness as stated above.
| Alerting anti-theft system can be carried out only when all passengers have left the car interior |
A warning Do not operate the system in a state of readiness so long as all the passengers did not leave the interior of the vehicle. Once inside the vehicle is a passenger (s), when he (and) will leave the interior of the vehicle can alarm sounds (siren).
The alarm status
The alarm is triggered when the vehicle is parked and the system is ready in one of the following cases.
1) open the front or back door without the transmitter or the ignition key.
2) Open the trunk lid without using the ignition key.
3) Open the hood.
In these cases the alarm sounds (siren) and the direction indicators will flash for 30 seconds. This can be repeated three times. To turn off the system, unlock the doors using the transmitter or the ignition key.
A warning Do not attempt to start the engine when the anti-theft system is in a state of readiness.
STATE TRIP
The system can be turned off by unlocking the driver's door or passenger by pressing the "UNLOCK" ("Unlock") on the transmitter or the ignition key. After that, the direction indicators will flash twice, indicating that the system shut down.
| The location and functions of the buttons on the transmitter remote control door locks |
A warning After shutting down the system, it can lead to a state of readiness, only produced the above steps to bring the anti-theft system in a state of readiness.
Flat spin
| PERFORMANCE ORDER | | 1. Press the "LOCK" ("Panic") on the transmitter. | | 2. The alarm sounds and the turn indicators will blink. | | 3. To turn off the system, press the button "LOCK" ("Panic") on the transmitter. |
|
The remote control door locks Locking the doors
| PERFORMANCE ORDER | | 1. Close all doors. | | 2. Press the "LOCK" ("Lock") on the transmitter. | | 3. All doors are locked. In this direction indicators flash once, indicating that the reduction of the system to a state of readiness. |
|
Unlocking doors
| PERFORMANCE ORDER | | 1. Press the "UNLOCK" ("Unlock") on the transmitter. | | 2. All doors are unlocked. In this direction indicators will flash twice, indicating that the system shut down. |
|
|
