printable version
Combination dimmer switch and turn indicators
Turn signal switch
As you move down the combination switch, blink turn indicators on the left side of the car. When moving the combination switch up, blink turn indicators on the right side of the car. Upon completion of the rotation, the switch will automatically return to the neutral position and, at the same time, the direction indicators stop flashing. If the control indicator lamps in the instrument cluster flashes more often than usual, it lit but not blinking or does not light up at all, it indicates a fault circuit indicator lamps. Check the fuse or the lamp. Operating mode switch when changing series
If you want to signal a lane change, move the lever up or down to the end and do not hold in this position. After releasing the lever automatically returns to the neutral position.
| The direction of movement of the switch of indexes of turn |
Switch the headlights
Rotate the drum at the end of the combination switch to turn on the lights. In the first position will be included parking lights, side lights, rear lights and instrument cluster lights. The next position will include headlights.
| The direction of rotation of the drum at the end of the combination switch to turn on the lights and headlights |
Outdoor lighting in the daytime
Hyundai car is equipped with lighting in the daytime. This coverage is used to improve the visibility of oncoming traffic. This vehicle lighting is specially designed to work in conditions when the engine is running and the headlights switch is in the "OFF" (Off.). However, the lighting in the daytime will be turned off when the parking brake. Switch beam headlights
To enable the high beam headlights, push the switch away. When the main beam is turned on, the control lamp lights up and switching beam headlights. When translating the lever back to the light switches from a distant one to a nearby one. The signal beam assistant
To signal a headlight move the lever to position themselves. When you release the lever back into place. Flashing headlights may even switch the headlamp is in the "OFF" (Off.).
| The direction of movement of the switch to signal high beam |
|