REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
			Technical Specifications (SOHC and DOHC)
			Checking the fuel pump
			Checking the pressure created by the fuel pump
			Verification system of injection MFI
			The control lamp fault (MIL)
			DTCs ?�OBD-II?�
			DTCs except ?�OBD-II?�
			Replacement of the fuel filter
			Replacing the overflow limiter (two-way valve)
			Replacing fuel level sensor
			The engine management system MFI
			Fuel injectors
			Throttle knot
			The power supply system with the carburettor
			Check idle speed
			Adjusting the idle speed
			Speed of idling and adjustment of the fuel mixture
			Check and adjustment of the starting device
			Check and adjustment of a free wheeling of a cable of an accelerator
			Fuel tank
			EVAP canister
			Replacement of the fuel filter
			Carburetor
			Cable and accelerator pedal
			Troubleshooting Fuel system with the carburettor
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Check idle speed

Test conditions

Lights, electric radiator fan and all electrical consumers must be switched off, and the transmission should be set to the neutral position.

PERFORMANCE ORDER

1. The engine should be heated-up coolant temperature 80-95 ?� C.
2. Start the engine and let it run in the engine speed to idle.
	3. Check the ignition timing and, if necessary, adjust it.
4. Take a trip by car for 5 minutes at a speed of 48 km / h or more than 5 to increase the engine speed up 2000-3000min ^-1.
5. Then allow the engine to idle for 2 minutes.
6. define the tachometer idling speed. The idle speed of the engine 1.3 liter with manual transmission: 850 ?� 100 ^min -1 at an angle of ignition timing 5 ?� 5 ?�

« previos page
The power supply system with the carburettor

next page »
Adjusting the idle speed