 printable version
Check of level and liquid replacement in an automatic transmission
A warning  The car should be on a level surface.
Check the fluid level
| PERFORMANCE ORDER | | 1. Apply the parking brake and block the wheels to eliminate stops the car rolling. | | 2. Start up the engine before warming up of a transmission to temperature 60 ~ 70 ?� C. | | 3. With the engine running, press the brake pedal and consistently move the selector lever from position P to position R> N> D> 1> 2> D> N> R> P, while holding the lever in each position of no more than 3 seconds. |
A warning Use measuring scale COOL (20 ?� C) only as a guide value.
|  | 4. Check the fluid level, which should be between labels HOT (65 ?� C). If you want to add the required amount of liquid required. Type of liquid for an automatic transmission: SK ATF SP-III or DIAMOND ATF SP-III |
|
Checking the fluid
A warning Carefully check the condition of the fluid in an automatic transmission, and determine whether the automatic transmission should be dismantled.
If the fluid in an automatic transmission is contaminated and scorched, indicating burnt plates or brake bands.
| PERFORMANCE ORDER | | 1. Check the color of the liquid in an automatic transmission. | | 2. Check the fluid in an automatic transmission on presence of unusual smells. To determine the change in color and smell of the liquid compare it with fresh fluid. |
|
Fluid Replacement
| PERFORMANCE ORDER | | 1. Place the drain pan under the transmission fluid. |  | 2. Remove the plug and drain all the liquid from an automatic transmission. | | 3. Replace the plug. Torque: 39-54 N ??? m | | 4. Remove the dipstick and fill with fluid required amount of liquid required. Type of liquid for an automatic transmission: SK ATF SP-III or DIAMOND ATF SP-III
Capacity: 5.9 liters |
A warning Do not pour the liquid above the mark HOT.
| | 5. Check the liquid level in an automatic transmission. |
|
|
