printable version
Removal and installation of modules, front airbags
Details of installation of the module driver's front airbag on models of release on 08.31.01 Details of installation of the module driver's front airbag on models of release since 1.9.01
| - Details of installation of the module driver's front airbag is shown in the illustrations, which include all the links in the text.
- Disconnect the negative wire from the battery.
- Remove the mounting screws (2).
- Separate the airbag module (1) from the steering wheel.
- On models of release since 1.9.01 release latches (3) on the pin wiring connector (4 and 5).
- Disconnect the connector (s) wiring (4/4 and 5) the gas generator igniter.
- Finally, remove the airbag module (1).
| Recyclable module must first be discharged in the workshop Car! |
- Installation is in the reverse order - track reliability of the latch clicks into place (s) connector (s).
- After finishing the installation, make sure of serviceability of operation of the combined return mechanism stalk in conclusion make a diagnosis SRS using special equipment (contact your service specialist).
|
|
Passenger Air Bag Details of installation of the module front passenger airbags on models of release on 08.31.01 Details of installation of the module front passenger airbags on models of release on 08.31.01
| - Details of installation of the module of the passenger's front airbag is shown in the illustrations, which include all the links in the text.
- Disconnect the negative wire from the battery.
- Remove the instrument panel (1) (see chap. Body).
- On models of release since 1.9.01 release latches (3) on the pin wiring connector (4 and 5).
- Disconnect the connector (s) wiring (4/4 and 5) the gas generator igniter.
- Release self-locking nuts (2) and remove the module of the passenger's front airbag.
| Recyclable module must first be discharged in the workshop Car! |
- Installation is in the reverse order - track reliability of the latch clicks into place (s) connector (s).
- Finally, make a diagnosis of the SRS using special equipment (contact your service specialist).
|
|
|