 printable version
The instrument panel, switches, trip computer
Details of installation of the instrument cluster Details of installation of the instrument cluster Details of installation of the housing of the instrument cluster  | | |
| - Details of installing the components of the instrument cluster are shown in the illustrations, which include all the links in the text.
- Disconnect the negative wire from the battery.
- Unlock the steering column and put it in the lowest position.
- Remove the upper section (3) of the column cover, - with appropriate configuration, release the side and front clips, then gently squeeze the lid and separate it from the dashboard.
- Hooking latches suitable wedge, remove the side panel trim (12).
- Having wrung out (arrow A) of the clips (4) and pulling down (arrow B), remove the frame (5) facing the instrument cluster.
- Remove the screws (9).
- Remove the clips (10).
- Pull the assembly of the instrument cluster (A1) and disunite forward pin (11) of wiring, pre-releasing the lock.
- Remove the instrument cluster (A1).
- If necessary, release the retaining clips and remove the casing of a combination (15) the cover (14).
- Installation is in the reverse order - track correctness of landing adjustment buttons odometer and clock. When planting frame (5) Thread the hook (6) into the mounting bracket (13) and, holding the frame up until you get a reliable snaps into place - the tabs (7) should get into receptacles staples (8) combinations of (A1).
|
|
|
