printable version
Device combination
Location of electrical connectors on the rear of the instrument cluster
1 - 34-pin electric socket green 2 - 20-pin electrical connector red (only installed on the 3rd embodiment) 3 - a control lamp beam of 1.12 W, | 4 - indicator lamp exhaust 1.12 W 5 - indicator lamp turns operation of the trailer 1.12 W 6 - 32-pin electrical connector blue |
Location screws dash
Removing
Removing the lower side finishing with the driver's side
| 1 - plug, 2 - the screw, 3 - screw 4 - lateral trim |
Removing the bottom panel of furnish of the panel of devices from outside the driver
| 1 - side cover, 2 - lower trim panel, 3 - the switch of light, 4 - Leveling headlights
The arrows mark the location of the screws bottom panel finishes. |
Removing the decorative facing a combination of devices
| 1 - the inside of the liner, 2 - clip 3 - Decorative Coating |
A warning The instrument cluster can only be replaced by an incandescent bulbs. Failure of one of the pointers or the presence of any other defect of the instrument cluster assembly must be replaced.
Setting
PERFORMANCE ORDER | 1. Installation is made in sequence, return to removal. | 2. If you are installing a new instrument cluster and correct readings Service-indicator and odometer. |
|
|