 printable version
Adjusting headlights
Location of holes to adjust the headlights in the horizontal (1) and vertical (2) planes
Correct adjustment of headlights is of great importance for traffic safety. Fine adjustment is possible only with the help of a special device. When adjusting the headlights is adjusted, and fog lamps. To adjust the headlights using Xia screws, which can be accessed through the holes in the top of the headlights, see. Fig. Location of holes for adjusting the headlights in the horizontal (1) and vertical (2) planes. Internal screw for adjusting the headlights in the vertical plane, and the external screw - to adjust in the horizontal plane. When adjusting the headlamp must meet the following conditions: - Tire pressure should be within the normal range,
- In the car must always be the driver,
- The fuel in the fuel tank must be more than 90%,
- The car should stand on wheels on a flat surface,
- Before adjusting the need to shake the car body to ensure that all elements of the suspension fell into place,
- Leveling headlights set to 0,
- Adjust only low beam headlights. The slope of the luminous flux of light of headlights is 10 cm at a distance of 10 m, t. E. 1%.
| 
