Removing and installing selector lever lock solenoid N110

Withdrawal

Remove the drive gear.

Unlock and disconnect plug connection.

Unlock the solenoid bracket in and out of the locking lever 1 and the drive gear (Fig. 3.20).

Setting

Put the lever of the electromagnet 2 vertically.

Slide the solenoid front mount the drive gear.

Connect the lever 2 with a locking lever 1 (Fig. 3.20).

Slide the solenoid to lock the drive in gear until it locks in its mounting (Fig. 3.21).

Check that the solenoid is mounted in the holder and the stop lever is in engagement with the locking lever.