Removal and installation of the slide valve box

Spool box and / or tubes can be removed / installed as specified in the gearbox, and when removed.

Withdrawal

If the operation is not yet complete - remove the oil pan and the oil strainer

Carefully remove the plugs for the hydraulic pressure sensor 1 in the ACP G1931 and hydraulic pressure sensor for the automatic transmission 2 G1942 (Fig. 3.73).

Unscrew the plugs (Fig. 3.75).

Carefully unlock and disconnect plugs (Fig. 3.76).

Oil temperature sensor Gearbox G93 tightened to a torque of 10 Nm (Fig. 3.77).

Unscrew the bolts slide valve boxes "criss-cross" (Fig. 3.78).

Torque: 8 Nm + 90 ?�.

The sensor output speed gearbox G195 is tightened to a torque of 10 Nm (Fig. 3.79).

Installation is carried out in reverse order.

After installation fill the ATF, and then check the level of ATF, if necessary - add oil