add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Transporter, Caravelle (1990 release)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Transporter / Caravelle
Home
 
Volkswagen
Transporter / Caravelle
Instructions
Engine
General Data Engine
Removing and installing engine
Removing radiator
Removal and installation of a mudguard of the engine
Toothed belt
Cylinder Head
Removing and installing the camshaft
Hydraulic bucket tappets
Replacing valve stem seals
Valve
Compression Test
Belt
Troubleshooting Engine
Ignition system
Ignition system
Safety precautions when handling electronic ignition system
Distributor
Check the high voltage transformer
Check the Hall sensor
Check and adjust the ignition timing
Spark plug
Troubleshooting ignition system
Lubrication system
Engine cooling system
The power supply system of the engine
Fuel injection
Exhaust system
Coupling
Transmission
Suspension
A steering
Brakes
Wheels and tires
Body
Electrical
 


Hit Counter by Digits


print page printable version

Check the Hall sensor



Check for dressing up

PERFORMANCE ORDER
1. Disconnect the Hall sensor (on the ignition distributor).
2. Connect a voltmeter to the outer contacts.
3. Turn the ignition switch.
4. The desired value is not less than 10 V. Otherwise, the control unit is defective.
5. Turn the ignition.

Verifying

PERFORMANCE ORDER
1. Disconnect the valve of cold start and the multi-connector injection valves.
2. Remove the rubber tip of the plug to the Hall sensor and disconnect sensor plug.
3. Connect LED indicators to the middle and outer wires plug Hall sensor.

A warning

During this test, do not touch the hand of the connected parts of the transformer and wiring indicator.


4. Turn on the starter.
5. The LED should blink, otherwise faulty Hall sensor. In this case, 4-cylinder engine to replace the ignition distributor, at the 5-cylinder engine distributor disassemble and replace the Hall sensor.
6. Connect plug valve cold start and multicontact connection of injection valves.




« previos page
Check the high voltage transformer
next page »
Check and adjust the ignition timing

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.