 printable version
Temperature sensor coolant
Check the temperature sensor | A connection plug
B. Temperature sensor
1, 2, 3, 4. Contacts |
Check | PERFORMANCE ORDER | | 1. Turn on and turn off the ignition. | | 2. Remove the connector plug (A). | | 3. Connect an additional wire terminals 1 and 2. | | 4. In machines without a circulation pump the fan should work. On machines with circulation pump should work the pump. The circulation pump is, for example, 4-cylinder gasoline engine under the left fan. |
A warning  Since the time switch after turning off the ignition and is only 10-12 minutes, by producing within this time.
| | 5. If the fan does not work, check the wiring on the wiring and repair the open, if necessary, replace the timer. | | 6. Turn the ignition switch. |
|
|
