1. Disconnect the valve of cold start and the multi-connector injection valves. |
2. Remove the rubber tip of the plug to the Hall sensor and disconnect sensor plug. |
| 3. Connect LED indicators to the middle and outer wires plug Hall sensor. |
A warning During this test, do not touch the hand of the connected parts of the transformer and wiring indicator.
|
4. Turn on the starter. |
5. The LED should blink, otherwise faulty Hall sensor. In this case, 4-cylinder engine to replace the ignition distributor, at the 5-cylinder engine distributor disassemble and replace the Hall sensor. |
6. Connect plug valve cold start and multicontact connection of injection valves. |