REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Rio (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Rio
		Instructions
		Engines A3E, A5D
		Greasing system
		Cooling
		Fuel system
		Ignition system
		Coupling
		Transmission
			Manual Transmission
			Automatic transmission F4E-K
				Technical data
				Check of work and adjustment of position of the selector lever
				Testing of teamwork of an automatic transmission and the engine for the motionless car (stall test)
				Testing time delay (Lag test)
				Check the transmission fluid pressure
				Check of level and liquid replacement in an automatic transmission
				The procedure for replacing the liquid in the converter of an automatic transmission
				Leaks of a liquid from an automatic transmission
				Replacement of oil sealing rings
				Removing and installing automatic transmission
				Repair of an automatic transmission
				Radiator cooling automatic transmission fluid
				Valve block
				The case of regulating valves
				Oil pump
				Check the resistance of the sensor, input speed of the turbine wheel
				Check resistance of speed sensor
				Mode switch transmission OD
				Switch range gearbox
				The temperature sensor of an automatic transmission
				Solenoid valves
				The linear solenoid valve
				Lever
				Repair of the selector lever
				Check the mechanism selector lever lock
		Axes and power shafts
		Suspension
		Wheels and tires
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment

Lever

Lever

1 - central panel;
2 - ashtray;
3 - the front section of the center console;
4 - the center console;
5 - the selector lever;
6 - an arm;

7 - cigarette lighter socket;
8 - a cable of the selector;
9 - selector lever cable;
10 - mounting plate;
11 - connector.

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Remove the ashtray and remove the two screws.
3. Disconnect the cigarette lighter socket and remove the central panel.
4. Remove the front section of the center console and the center console.
5. Move the selector lever to position R.
6. Remove the two screws on the cable sleeve of the selector.
7. Remove the nuts of the selector cable.
8. Remove the nuts of a cable lock and disconnect the security lock.
9. Remove the bracket.
	10. Disconnect the mode selector switch O / D.
	11. Remove the nuts of the base plate and remove the selector lever of the selector assembly.

Setting

PERFORMANCE ORDER

1. Set the selector lever and secure the base plate selector nuts. The inhaling moment: 15,7-22,6 N ??? m
A warning When you install the base plate of the selector arrow on the plate should be directed to the front of the car.
	2. Install the bracket.
3. Connect the mode selector switch O / D.
4. Move the selector lever to position R.
	5. Tighten the nuts of the base plate of the selector lever. Torque: 6,8-9,8 N ??? m
6. Tighten the bolt and nut selector cable. Torque: 6,8-9,8 N ??? m
7. Tighten the nuts of a cable lock. The inhaling moment: 9,8-14,7 N ??? m
8. Replace the front section of the center console and the center console.
9. Install the center panel and connect the cigarette lighter socket lighting.
10. Install the ashtray.
11. Connect the cable to the negative terminal of the battery.
12. Check the correct operation of the selector lever.