printable version

Removal and installation of receiver-dryer

Details of installation of receiver-dehydrator K /

1 - Facing linings 2 - Front upper cross beam of the frame 3 - Bolt 4 - Bolt 5 - Refrigeration Line	6 - Refrigeration Line 7 - Bolt (TORX) 8 - Receiver Drier E1 - Left block headlamp E2 - right block headlamp

PERFORMANCE ORDER

All sealing elements are subject to replacement without fail. Details of installation of receiver-dryer shown in the illustration, which includes all the links in the text. Remove the front crossmember of the frame (2). On models 163,113 Remove charge air cooler tract (see. Section Removal and installation of the radiator). On models 163,113 Remove the MAF sensor on the left behind the cooler charge air path (between the air cooler sleeve and the motor). In the context of the workshop Car make discharge system K / V. Remove the screw (3) securing the refrigeration line (6) to the expansion valve and the screw (4) from the line (5) leading from the condenser to the receiver-drier (8). Remove both refrigeration lines. Loosen the bolt (7) Remove the clip and the receiver-drier (8). Installation is in the reverse order - filling the air conditioning system should be carried out in a workshop of car-care center.