REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W163
		Introduction
		Controls and receptions of safe operation
		Current care and maintenance
		Engine
		System of cooling, heating and air conditioner
		The power supply system and exhaust
		Systems of an electric motor
		Manual box of a gear change
		The transmission automatically processed
		Transmission Line
		Brakes and auxiliary systems
			General information and safety measures
			Check the brake system for leaks
			Check of serviceability of functioning of the vacuum brake booster
			Check non-return valve
			Removal and installation of the main brake cylinder
			Removing and installing brake servo stroke sensor diaphragm BAS
			Removing and installing hydromodulator ETS / ESP
			Removing and installing hydraulic lines laid between GTZ and hydromodulator ETS / ESP
			Assessment of the degree of wear and replacement brake pads
			Replacement brake hoses
			Removal and installation of a support
			Removal and installation of a brake disk
			Replacing the parking brake shoes
			Bleeding brake system
			Removal and installation of the pedal assembly and the gauge-switch of stoplights
			Removing and installing brake pedal charging parking
			Removal and installation of a rope assembly handbrake
			Adjusting the parking brake
			Removal and installation of wheel gauges ABS / ETS / ESP
		Suspension and steering
		Body
		Onboard electric

printable version

Removal and installation of wheel gauges ABS / ETS / ESP

Details of the sensors ABS / ETS / ESP front wheels

6a - self-locking fixing bolts
L6 / 1 - the left front wheel sensor
L6 / 2 - Switch the right front wheel
L6 / 1x1 - contact sensor wiring connector left
L6 / 2x1 - contact sensor wiring connector right

Details of the sensors ABS / ETS / ESP rear wheels

6a - self-locking fixing bolts
L6 / 3 - the left rear wheel
L6 / 4 - the right rear wheel sensor
L6 / 3x1 - contact sensor wiring connector left
L6 / 4x1 - contact sensor wiring connector right

PERFORMANCE ORDER
All the self-locking nuts and bolts must be replaced without fail!
Details of installation of the speed sensors shown.
Before installing, make sure in good condition Hub rotor lightly grease molybdenum-containing lubricant landing slot in the steering knuckle / hub-assemblies, track reliability of fixing of contact sockets and wiring.

Front cable

Details of installation of the front section of the rope assembly handbrake shown in the illustration, which includes all the links in the text.

Details of installation of a pedal charging the parking brake

« previos page
Adjusting the parking brake

next page »
Suspension and steering