printable version

Removal and installation of components of an inlet air path

Details of installation of the air intake on models 163.136 (111 series engine)

4/16 - Air intake Arrow - Lock

Details of installation of the air intake on models 163.136 (engine series 111) are shown in the illustration, - pre-remove the grille (see chap. Body).

Air Cleaner

Details of the installation of an air cleaner models 163.136 (111 series engine)

Arrows - Rubber pads

Details of the installation of an air cleaner models 163.136 (engine series 111) are shown in the illustration, - do not forget to release the hose cooling path of a guide on the housing of the air cleaner.

The gauge of measurement of weight of air (MAF)

Details of installation of the MAF sensor models 163.136 (111 series engine)

B2 / 5 - MAF sensor

Details of installation of the MAF sensor models 163.136 (engine series 111) are shown in the illustration, - do not forget to replace the O-ring.

The bypass hose air cleaner

Details of the installation of the bypass air hose models 163,136

4/5 - bypass hose air cleaner B17 - gauge of temperature of air supplied to the interior	Arrows - Fixing clips

Details of the installation of the bypass air hose models 163,136

Arrows - Fixing clips

Details of the installation of the bypass air hose models 163,136

Arrows - Fixing clips

Details of the installation of the bypass hose air cleaner models 163.136 (111 series engine) shown.

The models 163.154 / 157

Details of installation of components of an inlet air path models 163.154 / 157 (112 series engines)

1/2 - Right crankcase ventilation line 2 - Air Cleaner 2/1 - The resonator chamber	2/2 - Duct 2/3 - Bolt B2 / 45 - MAF sensor

Details of installation of components of an inlet air path models 163.154 / 157 (112 series engines) are shown in the illustration. Before removing the air hose (2/2), disconnect the electronic throttle control cable (arrow) - Press the screwdriver down the locking tab fastening clamp air hose (2/2) to the actuator of the electronic accelerator.

The models 163.172 / 174/175

Details of installation of components of an inlet air path models 163,172 / 174/175 (113 series engines)

1 - cover a broad tank of system of cooling 2 - overflow pipe 3 - line cooling path 4 - line cooling path 5 - line cooling path 6 - pin connector 7 - Expansion tank 8 - Vacuum hose crankcase ventilation system	9 - Duct 9/1 - Bolt 10 - Air Cleaner 11 - Lock Duct 12 - The resonator chamber 13 - pin wiring MAF sensor B2 / 5 - MAF sensor

PERFORMANCE ORDER

Details of installation of components of an inlet air path models 163.172 / 174/175 (113 series engines) are shown in the illustration, which includes all the links in the text. Opening the cover (1), relieve excess pressure in the cooling system expansion tank (7). Disconnect the surge tank (7) overflow pipe (2). Disconnect the surge tank (7) of the line (3, 4, and 5) the cooling path. Remove the expansion tank (7). Disconnect the connector (6) sensor MAF (B2 / 5). Disconnect the vacuum hose (8) crankcase ventilation system. Unscrewing the screw (9/1), separate air tube (9) from the cylinder head cover. Remove the air cleaner (10) gauge MAF (B2 / 5). Press the screwdriver down the locking mechanism (11) of the air hose. Remove the resonator chamber (12). Remove the sleeve (9), complete with sensor MAF (B2 / 5). Installation is in the reverse order.