 printable version
Removal and installation of electric actuators and tailgate cover fuel filler tank
Details of installation of electric activator tailgate
| - Details of installation of electric activator tailgate shown in the illustration, which includes all the links in the text.
- Remove the door lock assembly (see chap. Body).
- Remove the assembly from the door handle (1) motor (M14 / 7) activator lock.
- When the door is open Check the functioning of an electric motor with a command from the remote control of a single lock.
- If necessary, replace the activator.
- Installation is in the reverse order.
|
|
Cover plate fuel filler Details of installation of electric activator lid lock the fuel filler tank
| - Details of installation of electric activator lid lock the fuel filler tank shown in the illustration, which includes all the links in the text.
- Remove the C-pillar trim panel (see chap. Body).
- Remove the cover (1) inside the fuel filler.
- Remove the outer (2) and internal (3) screws.
- Press the choke unit (4) to the right, turn the fastening screws (5) Disconnect the connector (6) and remove the wiring assembly of the drive motor (M14 / 10).
- Installation is in the reverse order. Finally, check the serviceability of functioning drive the lock when open.
|
|
|
