 printable version
Removal and installation of electric drive controls door windows
 | Implementation of this work would be wiser to entrust the service specialist. |
The front doors Details of the installation of the electric motor drive control front window
| - Details of the installation of the electric motor drive control front window shown in the illustration, which includes all the links in the text.
- Remove the interior door trim and separate from the door frame insulation film (see chap. Body).
- Remove the fastening screws (1) Disconnect the wiring connector (2) and remove the assembly motor drive control window (M10 / M10 or 3/4).
- Installation is performed in reverse order - do not forget to lightly grease the drive gear, if necessary, replace the insulation film of the door frame.
|
|
Rear doors Details of the installation of the electric motor drive control rear door window
| - Details of the installation of the electric motor drive control tailgate window shown in the illustration, which includes all the links in the text.
- Remove the door window regulator mechanism assembly (2).
- Remove the fastening screws (1) and remove the drive motor assembly (M10 / M10 or 5/6).
- Installation is in the reverse order, remember to lightly grease the gear motor.
|
|
|
