REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz M-Class (W163, 1997 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W163
		Introduction
		Controls and receptions of safe operation
		Current care and maintenance
		Engine
		System of cooling, heating and air conditioner
		The power supply system and exhaust
		Systems of an electric motor
		Manual box of a gear change
		The transmission automatically processed
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric
			General information and precautions
			Search of causes of failures of electrical equipment
			Safety locks - the general information
			Circuit breakers - the general information
			Relay - the general information and check of serviceability of functioning
			The digital CAN data bus
			Mounting blocks, parts of control systems
			The instrument panel, switches, trip computer
				Removal and installation of the instrument cluster
				Replacing bulbs rotary-push control panel handles the operation of the heating / ventilation / air conditioning
				Removal and installation of on-board power sockets
				Removing and installing center console switch group
				Removal and installation of individual electric switches controls the rear power windows
				Removal and installation of switches electrically adjustable front seats
				Removing and installing steering column switch assembly
				Removal and installation of assemblage of the roof console
				Removal and installation of the switch of management of functioning of electric drive of the top hatch
				Removal and installation of assemblage of the trip computer (with an appropriate vehicle)
			Drive motors
			Signal and lights, rain sensors and outdoor temperature
			System of additional safety (SRS)
			Audio
			Wiring

printable version

Removal and installation of on-board power sockets

Details of installation of the front power socket board

PERFORMANCE ORDER
Details of installation of the front-board power socket shown in the illustration, which includes all the links in the text.
Remove the right lower cover (1) the instrument panel (see chap. Body).
Disconnect the connector (2) wiring.
Propping the lid (1), carefully extricate her from the socket (X58 / 1).
Installation is in the reverse order.

Rear Outlet

Details of installation of back-board power sockets

PERFORMANCE ORDER
Details of installation of back-board power socket shown in the illustration, which includes all the links in the text.
Open the cover on the right side panel of the luggage compartment trim.
Using a suitable wedge gently release the socket assembly (X58 / 4) of the trim panel.
Disconnect the wiring and remove the socket (X58 / 4).
Installation is in the reverse order.

« previos page
Replacing bulbs rotary-push control panel handles the operation of the heating / ventilation / air conditioning

next page »
Removing and installing center console switch group