printable version

Removal and installation of switches electrically adjustable front seats

Details of installation switches electric seat adjustment

1 - Front seat 2 - Front panel trim 3 - The screws 4 - The side panel trim 5 - Screws 8 - Locking tabs	S22 - driver's seat adjustment switch S22x1 - contact switch wiring connector S23 - passenger seat adjustment switch S23x1 - contact switch wiring connector H54 / 1 - pin wiring regulator ESA

PERFORMANCE ORDER

Details of installation switches electric front seat adjustment shown in the illustration, which includes all the links in the text. Remove the screws (3) securing the front panel (2) finishing of the seat frame. Pull the panel (2) by approximately 1 cm down and remove it, leaning forward - do not forget to release the wiring harness from the clamps on the rear side of the panel. Remove the fastening screws (5) and remove the side panel (4) finishing of the seat frame. Disconnect the wiring connector (S22x1 or S23x1) from the corresponding switch (S22 or S23). Disconnect the connector (H54 / 1) electrical seat adjusters (ESA). Clutching the locking tabs (8), release the appropriate radio button (S22 or S23) of the trim panel (on the inner side of the latter). Installation is in the reverse order.