 printable version
Removal and installation of the cooling fan assembly
Details of installation of the fan impeller with a viscous clutch models with petrol engine 111 series (ML 230)
Details of installation of the fan impeller with a viscous clutch models with petrol engines series 112/113
Details of the installation of the impeller fan with viscous coupling the example of gasoline models shown in the illustrations. Fan shroud Details of installation of the fan housing with a viscous clutch (for example, the ML 230) Details of installation of the fan housing with a viscous clutch in the example of petrol models equipped with engine series 111 shown in illyustratsiyai. Electric fan M612 Details of the installation of the electric fan assembly on the ML 270 CDI
| - Details of the installation of the electric fan assembly on the example of the ML 270 CDI presented in the figure, which includes all the links in the text.
- Drive the vehicle on a lift.
- Open the hood.
- Disconnect the negative wire from the battery.
- Disconnect the connector (1) electrical coupling.
- Disconnect the fan wiring circuit 30 (2).
- Release the wiring from the support bracket.
- Remove the front section of the soundproofing.
- Release the lower retainers (3) securing the fan assembly.
- Remove the bolts (5).
- Locking Remove the nuts (4).
- Lift the fan assembly with the hinge supports at the upper edge of the radiator and lowered down, remove it from the engine compartment.
- Installation is in the reverse order.
|
|
M628 Details of the installation of the electric fan assembly on the ML 400 CDI Details of the installation of the electric fan assembly on the ML 400 CDI
| - Illustrative material for removing and installing the electric fan assembly on the ML 400 CDI shown in the illustrations, which include all the links in the text.
- Drive the vehicle on a lift.
- Open the hood.
- Disconnect the negative wire from the battery.
- Remove the radiator from the bottom line of the path of cooling ATF (3).
- Release the lower mounting clips of the fan assembly.
- Remove the lower side of the fan assembly mounting bolts.
- Disconnect the electrical connector (2).
- Release the wiring from the support bracket.
- Disconnect the radiator upper hose from the cooling path (6) and the upper oil passage (5).
- Picking up, remove the fan assembly from the engine compartment.
- Installation is in the reverse order.
|
|
| 
