 printable version
Removal and installation of the lower lids dashboard
Removal and installation of the lower lids dashboard Right Cover Details of installation of the right lower lid dashboard
| - Remove the mounting bolts (1) and remove cover (2) by pulling it down into the direction of the arrow.
- Remove the bolts (3) and remove the cover (4).
- On models corresponding complete set (code E2), disconnect the wiring from the front right speaker of the emergency call TELE AID.
- Installation is in the reverse order - track correctness of landing the cover (4) relative to the air ventilation / heating the cabin.
|
|
Left cover Details of installation of the lower left instrument panel cover  | | |
| - On models corresponding complete set (code ET2) activate the service mode of the emergency call TELE AID (see. Section Activate / deactivate the service mode of the emergency call AID TELE).
- Disconnect the negative wire from the battery.
- Remove the mounting bolts (3) and remove the right side panel (1) finish the driver foot well.
- Remove the bolts (4) and lower left bottom cover (2) the instrument panel.
- Unlock and disunite diagnostic socket DLC (X11 / 4), with appropriate equipment, disconnect the wiring from the receiver auxiliary heater STH (A6 / 1) (code H12) and the right front speaker system emergency call TELE AID (H4 / 46) (code E2).
- Lowering even lower with the rotation, remove the cover (2).
- Installation is in the reverse order - track correctness of landing in the guide and secure it clicks into place air ventilation / heating the cabin.
- On models corresponding complete set (code ET2) deactivate service mode of TELE AID (see. Section Activate / deactivate the service mode of the emergency call AID TELE).
- Finally, make the DTC reading and clearing of system memory on-board self-diagnostic scanner using STAR DIAGNOSIS (6511 1801 00) (see chap. Systems of an electric motor).
|
|
|
