REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Touareg (from 2003 to 2006, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Touareg
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
			Overview
				Example data plate car
				Front brakes
				Rear brakes
				Check the brake system
				Bleeding brake system
				Bleeding (major)
				Additional pumping
				The sequence of pumping
				Removal and installation of the membrane potentiometer stroke brake booster G420
				Removal and installation of the vacuum pump the brakes V192
				Removing and installing brake servo pressure sensor G294
				Removal and installation of the main brake cylinder
				Removing and installing brake booster
				Repair the brake pipe
				Repairing front brake, Brembo brake calipers 17 '' (1LC)
				Removing and installing brake pads
				Repair rear wheel brakes, brake caliper FN 44
				Removing and installing brake pads
				Adjusting the parking brake
				Adjust the brake pads on two wheels
				Checking freewheel lever parking brake pedal
				Removal and installation of the lever of the foot parking brake
				Removing and installing rear brake cables
				Disconnecting the brake pedal from the brake booster
				Connecting the brake pedal to the brake booster
				Removal, installation and adjustment of brake light switch
				Anti-lock braking system (ABS)
			Tables
		Onboard electric
		Body
		diagrams

printable version

Repair rear wheel brakes, brake caliper FN 44

NOTE

For pumping the brake fluid reservoir using a device for filling and bleeding the brake system VAS 5234 or a device for filling and bleeding the brake system - VAG 1869/4.

Before removing a brake caliper or disconnecting a brake hose, set the focus brake pedal VAG 1869/2 (the lower the pressure).

Fig. 6.41. The components of the rear brake 1 - the brake disc / brake drum; 2 - installation bolt, 20 Nm; 3 - bracket-holder; 4 - hex bolt, 200 Nm; 5 - the brake pads; 6 - retaining spring; 7 - brake caliper; 8 - cable holder Brake pad wear indicator; 9 - screw 10 Nm; 10 - Guide Bolt, 30 Nm; 11 - cap; 12 - a bolt with hexagon socket, 8 Nm; 13 - an arm; 14 - the brake hose with the nozzle and the hollow screw 38 Nm; 15 - a coupling pin; 16 - compression spring; 17 - diverter spring; 18 - diverter spring; 19 - the brake pads; 20 - Castle spacer; 21 - an adjusting nut; 22 - bracket-holder; 23 - Rear brake cable

« previos page
Removing and installing brake pads

next page »
Removing and installing brake pads