 printable version
Disconnecting the brake pedal from the brake booster
ATTENTION The course of the brake pedal should not interfere with additional mats. |
| Fig. 6.57. The brake pedal (automatic gearbox): 1 - the pedal assembly support bracket; 2 - hexagon nut, self-locking, 20 Nm; 3 - finger; 4 - the brake pedal; 5 - bearing; 6 - the support bracket; 7 - a support; 8 - hex bolt, 8 Nm; 9 - hinge support; 10 - a bolt; 11 - lock washer; 12 - bracket; 13 - hex bolt, 8 Nm; 14 - brake light switch and the brake pedal sensor
|
| Fig. 6.58. Installation tools: 1 - the brake pedal; 2 - the push rod; 3 - Pull-tabs
|
Place the tool T10189 to mount the push rod in the brake pedal and support bracket (Fig. 6.58). First, a little tap on the brake pedal in the direction of the brake booster and hold in this position. Then push in the direction of tool T10189 brake booster, thus hold the brake pedal (pedal should not move at this time ago). Thus Pull tabs 3 are pressed mounting ball head push rod 2 (Fig. 6.58). Press tool T10189 further in the direction of the brake booster and brake pedal at the same time pull in the direction of the driver's seat. (Thereby the brake pedal is moving away from the ball head push rod).
|
