| 1. Check the coolant hoses, bending and squeezing porosity. Cured hoses replaced. |
| 2. The hoses on the joints should sit securely. |
| 3. Check tightness of clamps. If necessary, replace the old new collars. |
4. Check the cover gasket for damage.
A warning  The reason for the low level of coolant can be properly screwed cap.
|
| 5. If the coolant level is often omitted, as the leak is found, check the cooling system for the engine is warm. To do this, heat the engine and run at idle until the fan is not switched on. See, it does not follow any coolant from the water pump. |
6. Significant leakage of coolant and / or oil in the coolant, and the white clubs exhaust gas heat of the engine indicate a defective cylinder head gasket.
A warning Sometimes it is very hard to find the leak. Then check recommended pressure on the SRT (requires a special device). This is also necessary to check pressure release valve on the lid of the tank. The required opening pressure for the overpressure valve: the petrol engine: 1.3-1.5 bar; Diesel engines: 1.2-1.5 bar.
|
