Terms memorize DTC

ECU memorizes the code R0506 or R0507 and includes a warning light engine management system, if two cycles driving for 15 with the value of control commands and the idle speed are not consistent with the values recorded in the computer memory. For this purpose the following conditions:

- Air flow through the regulator at idle over 4.1 g / s (R0506), or 1.7 g / s (R0507);

- Deviation of the engine speed from the norm is less than 200 ^min -1;

- The vehicle speed is equal to zero;

- Coolant temperature is above 75 ?� C.

The output of this code indicates that the damper control and idle speed are not consistent with the values enshrined in the memory of the computer.

ECU memorizes the code R0506 or R0508 and includes a warning light engine management system, if the two driving cycles cascade control winding opening (for R01506) or cascade control wound closure (for R01508) has a short circuit on the + 12V battery.

ECU memorizes the fault code and includes a warning light engine management system, if the two driving cycles in the chain cascade control winding opening (for R01505) or cascade control wound closure (for R01507) has an open or short circuit on "weight".