 printable version
Removal and installation of overlays of door sills
Details of the installation of side door sill
| - Details of installation of the door sill of the side shown in the illustration, which includes all the links in the text.
- Remove the sill (1) of the cover (2).
 | On models of release on the 08.99 release latches, moving from the center to cover the edges on models of release with a 09.99 start from the front end of the cover and move back. |
- Remove the screws (3) securing the pad to the threshold of the door.
- Remove the plug (4) and remove the screws (3) securing the pad to the rack B.
- On models of release 08.99, remove the rear pin mount pad (1).
- Leaning forward, separate cover (1) from the C-pillar and remove it from the vehicle.
- Installation is in the reverse order - if necessary, slightly bend with suitable wedge finishing the rack to provide adequate space for the landing pad (1).
|
|
Side doors Details of installation of lining threshold tailgate
| - Details of installation of the tailgate lining threshold shown in the illustration, which includes all the links in the text.
- Remove the plug (1), - try not to scratch pad - and turn them beneath the lining mounting screws (2).
- Remove the cover plate (2), - on models equipped with trip computer, disunite pin connector wiring-board compass.
- Installation is in the reverse order - track correctness of planting rubber seal.
|
|
|
