 printable version
Removing and installing rear seat
Details of installation of double (60%) double section rear seat on models of release on 08.31.99
| - Details of installation of double (60%) double section rear seat on models of release on 08/31/99 shown in the illustration, which includes all the links in the text.
- Remove the head restraints.
- Release the clips and remove the cover (1) with the left support of the seat.
- Remove the mounting bolts (2), remove the section of the two-section rear seat and pull it out through the back door.
- Installation is in the reverse order - replace fasteners, threaded bolts before installation grease with special sealant to secure the threaded connections.
|
|
Models of release since 1.9.99 Details of installation of double (60%) double section rear seat on models of release since 1.9.99
| - Details of installation of double (60%) double section rear seat on models of release since 01/09/99 shown in the illustration, which includes all the links in the text.
- Remove the head restraints.
- Remove the bottom cover (4) (only with two-piece section).
- Give fixing bolts (2) and nuts (3).
- Unscrew the bolts from the rear section of the single seat, - the frame sections are superposed.
- Remove the two-section section and pull it out through the back door.
- Installation is in the reverse order - replace fasteners, threaded bolts before installation grease with special sealant to secure the threaded connections.
|
|
Single (40%) section of seats Model release of 08.31.99 Details of installation of single (40%) double section rear seat on models of release on 08.31.99
| - Details of installation of single (40%) double section rear seat on models of release on 08/31/99 shown in the illustration, which includes all the links in the text.
- Remove the headrest.
- Remove the bottom cover (3).
- Unscrew the front fixing screws (1).
- Fold down the seatback.
- Lower the seat assembly to the floor.
- Remove the rear mounting screws (2) and remove the one-place seat section.
- Installation is in the reverse order - replace fasteners, threaded bolts before installation grease with special sealant to secure the threaded connections.
|
|
Models of release since 1.9.99 Details of installation of single (40%) double section rear seat on models of release since 1.9.99
| - Details of installation of single (40%) double section rear seat on models of release since 01/09/99 shown in the illustration, which includes all the links in the text.
- Remove the headrest.
- Remove the bottom cover (4) (only with a one-section).
- On models equipped with rear side airbags, disconnect the wiring from the belt buckle and remove the harness attached to the seat frame with tape.
- Remove the front mounting bolts (1).
- Fold down the seatback.
- Lower the seat assembly to the floor.
- Remove the rear mounting bolts (2) and remove the one-place seat section.
- Installation is in the reverse order - replace fasteners, threaded bolts before installation grease with special sealant to secure the threaded connections.
|
|
|
