printable version

Removing and installing trim panels front foot wells

Details of the installation of the front panel trim foot wells

3 - Panel finishes driver foot well 4 - Panel finishes passenger foot well	7 - Catches

PERFORMANCE ORDER

Corresponding illustrative material is presented in the figure, which includes all the links in the text. Remove the cover plates corresponding to the threshold of the door (1) (see. Section Removal and installation of overlays of the door sill). Remove the lining of the threshold of the two front screws. Separate the lower front corner of the door seal (2). When working in the driving footswitch pit remove the bolt (5) securing the release lever latch lock the hood (6) to the rack drive A. Disconnect the cable and remove the lever (6). When removing finishing well release the passenger, turning 1/4 turn counterclockwise and in the upright position, the cover lock cabin mounting fuse and relay box (8), and then give a nut (9). Releasing the remaining clips, remove the finishing panel (3 or 4), if necessary, slightly raise the cover threshold. Installation is in the reverse order.