 printable version
Removal, dismantling and installation of the central console
Details of installation of the central console
| - Corresponding illustrative material is presented in the illustration which includes all the links in the text.
- Remove center armrest / console storage compartment lid (see. Section Removal and installation of a cover of the console storage compartment).
- Remove the front screws (2) securing the console housing (1).
- Disconnect the electrical wiring from the rear door power window switch (S21 / 15s1 and S21 / 15s2), on models of release on 08/31/01, release the harness from the support bracket.
- Disconnect the electrical connector on the panel under the floor console, on models of release on 08/31/01, release the harness from the support bracket.
- Remove the rear mounting screws (4) and remove the casing of the console (1) in gathering with the lower section, for moving this selector AT lever to position ?�N?�.
- Installation is in the reverse order - models of release since 01/09/01 make sure of reliability of fixing the duct.
|
|
Disassembly and assembly Details of installation of the central console components
| - Corresponding illustrative material is presented in the illustration which includes all the links in the text.
- Remove the console assembly (See above.) And transfer it to the workbench.
- Remove the switches control the operation of the rear power windows (the cover (2) is removed from the outside, switches - from the inside).
- Remove the rear ashtray (3).
- Remove chashkoderzhatel (4).
- Remove the inner member (6).
- Remove the six mounting screws and separate the upper section / cover (7/1) console from the bottom (9).
- Installing components made in the reverse order of their removal.
|
|
|
