REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
			eleven Technical specifications of petrol engines
			Compression Test
			Toothed belt
			Adjusting the tension of the toothed belt
			Adjusting V-belt tension
			Adjusting the tension of the alternator drive belt
			Camshafts
			Check and adjustment of backlashes of valves on engines of 1.8 and 2.0 liters (MLA)
			Hydraulic jacks of backlashes of valves of the engine of 1,6 l
			Install the cylinder head cover
			Chain guide
			Chain
			Installation of camshafts
			The mechanism of change of the moment of opening and closing of valves (CVVT) on engines of 1.8 and 2.0 liters
			Repair of a head of cylinders
			Engine Supports
			Removing and installing engine and gearbox
			Cylinder block
			Crankshaft
			Flywheel
			Piston
			Air filter (ACL)
			An exhaust manifold
			Intake manifold
			Exhaust
			Troubleshooting
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Flywheel

Withdrawal

PERFORMANCE ORDER

Remove the gearbox and clutch.
Turn out bolts and remove a flywheel. If the car has an automatic transmission, remove the drive plate. When releasing the flywheel lock bolts from turning.

Check

PERFORMANCE ORDER

Check the condition of the surface of the flywheel contacting the clutch disc. If there is a significant deterioration replace the flywheel.
Check flywheel runout surface in contact with the clutch plate. Heartbeat: 0.1 mm ^3.
Check the condition of the flywheel for damage and wear and replace it if necessary.

Setting

Install the flywheel or the drive plate to the crankshaft. The special tool, lock the flywheel from turning and tighten the flywheel bolts.

Torque: 120-130 N ??? m.

« previos page
Crankshaft

next page »
Piston