add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
eleven Technical specifications of petrol engines
Compression Test
Toothed belt
Adjusting the tension of the toothed belt
Adjusting V-belt tension
Adjusting the tension of the alternator drive belt
Camshafts
Check and adjustment of backlashes of valves on engines of 1.8 and 2.0 liters (MLA)
Hydraulic jacks of backlashes of valves of the engine of 1,6 l
Install the cylinder head cover
Chain guide
Chain
Installation of camshafts
The mechanism of change of the moment of opening and closing of valves (CVVT) on engines of 1.8 and 2.0 liters
Repair of a head of cylinders
Engine Supports
Removing and installing engine and gearbox
Cylinder block
Crankshaft
Flywheel
Piston
Air filter (ACL)
An exhaust manifold
Intake manifold
Exhaust
Troubleshooting
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Intake manifold



Withdrawal

PERFORMANCE ORDER

  1. Remove the engine cover.
  1. Remove the air inlet connected to the throttle assembly.
  2. Remove the accelerator cable.
  3. Remove the crankcase ventilation hose and the vacuum hose of the vacuum brake booster.
  1. Disconnect the vacuum hose connections and connectors from the meter air flow sensor and throttle position.
  1. Relieve pressure in the fuel system, and disconnect the fuel high-pressure hose.
  2. Remove the bolts from the intake manifold.
  3. Remove the intake manifold and gasket.
  4. Disconnect the wiring harness connector from the fuel injector.
  5. Remove the fuel line to the fuel injectors.

Be careful not to drop the fuel injectors when removing fuel line.

Check

PERFORMANCE ORDER

  1. Check the air chamber in the absence of defects or cracks.
  2. Check intake manifold for damage or cracking of any part.
  3. Check the air pipe for damage or cracking of any part.

Setting

PERFORMANCE ORDER

  1. Install the intake manifold with a new gasket.
  2. Install the fuel line with a fixed thereto fuel injectors.

Be careful not to drop the fuel injectors when installing the fuel line.

  1. Connect the wiring harness connector to the fuel injectors.
  2. Install the intake manifold support.
  3. Connect the fuel high-pressure hose.
  4. Install the crankcase ventilation hose and the vacuum hose of the vacuum brake booster.
  5. Install the air inlet connected to the throttle assembly.
  6. Install the accelerator cable.
  7. Plug connectors for sensors Air flow meter and throttle position.




« previos page
An exhaust manifold		 next page »
Exhaust

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.