REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
			The fuel system of petrol engines
			The fuel system of diesel engines
				Technical data
				General information about the injection system ?�Common Rail?�
				Features of the injection
				Controlling fuel injection
				The main fuel injection
				Additional fuel injection
				Reducing emissions
				Common Rail fuel system
				EDC Control System
				ECU
				Management of the maximum amount of air entering the engine
				The active shock absorber, reducing fluctuations of the engine speed of the engine
				Switching off the engine
				Glow plugs
				Removal and installation of injectors
				Installing the high pressure fuel pump
				Meter of air (Air flow sensor - AFS)
				The coolant temperature sensor (ECT)
				Camshaft position sensor (CMP)
				Sensor crankshaft angle
				Sprayers
				Fuel pressure in the high pressure accumulator (RPS)
				The fuel temperature sensor (FTS)
				Pressure control valve
				Troubleshooting
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Installing the high pressure fuel pump

Fuel system operates at high pressures (1350 bar).
Do not carry out any work on the fuel system with the engine running or within 30 seconds after it stops.
Always follow the precautions.
When working ensure absolute cleanliness.

PERFORMANCE ORDER

Insert coupling the pump.
Apply a thin layer of lubricant to the O-ring and install the fuel pump to the cylinder head while turning the pump to engage the pump shaft with the camshaft.
Put on a carving of bolts of fastening of the fuel pump blocking compound, which excludes their spontaneous unscrewing.
Screw bolts and washers and tighten their demanded moment. Torque: 13-18 N ??? m.