 printable version
Removal and installation of seat backs
Details installing front seat backrest (models with electric front seats without memory function) Details installing front seat backrest (models with electric front seats with memory function)
| - Details of installation of the front seatback shown in the illustrations, which include all the links in the text.
- Remove the assembly seat (see. Section Removal and installation of the panels carpeting).
- Remove the side panel trim frame and - when appropriate equipment - Disconnect the electrical wiring connectors thermoelectric heating element (3) and the control unit control (N32 / 1 or N32 / 2) (4).
- Remove the screws (2) fixing the backrest (1) and remove the latter from the assembly seats.
- Installation is in the reverse order - track correctness of wiring.
|
|
Backseat Model release of 08.31.99 Details of installation of the two-piece rear seat backrest on models of release on 08.31.99
| - Details of installation of the rear seat backrest on models of release on 08/31/99 shown in the illustration, which includes all the links in the text.
- Loosen the seat cover to provide access to the attachment of support backs (2 and 3).
- Remove the screws (1) securing the upper cover plates (2).
- Having hooked, remove the lower trim (3).
- Remove the screws (4 and 5) fixing the left (9) and right (11) rear seat backrests to their supports (8 and 10).
- Remove the screws fastening seatbelt buckles and release anchor nodes belts enough to provide access to the screws (7) bracket backs.
- Remove the screws (7) and remove the backrest.
 | When removing the left and right backs, pull out their outriggers. |
- Installation is in the reverse order
|
|
Models of release since 1.9.99 Details of installation of the two-piece rear seat backrest on models of release on 08.31.99  | |
| - Details of installation of the rear seat backrest on models of release since 01/09/99 shown in the illustration, which includes all the links in the text.
- Remove the luggage compartment floor cover.
- Lower section is not subject to dismantling seat foot well.
- When disassembling the double section to remove the two mounting bolts, flex the upholstery, release the rear latches and remove installed under the armrest pad (1).
- Remove the mounting bolts (2) and remove the side plates (3) back support.
- Remove the bolts (4) of the support bracket of the back, when disassembling the double preliminary lower back section to provide access to the screws on the inside bracket.
- Lower section served by the back foot in the well.
- Lower the front control knob and remove the screw (5) back to the outer mounting support.
- On the double section of the release the cover from the rear side airbags (9) DELAY upholstery and remove the screw (8) securing the anchor node (10) belt (7) in seat frame. With appropriate configuration (rear side airbags), remove the seat frame and release the holder from the wiring connector, then remove the seat belt buckle,
- Remove the backrest (6).
- Installation is in the reverse order.
|
|
|
